Hobbywing eZRun v2.0 35A Brushless Power System w/ 10T Motor
Brand:
Hobbywing
Code:
HWC10T35
Name:
Hobbywing eZRun v2.0 35A Brushless Power System w/ 10T Motor
Description:
Suitable for 1/10th, 1/12th and 1/18th cars.
"eZRun" series brushless system is budget-friendly, it is specially designed for 1/10 and 1/12 scale EP ON-ROAD car, and it is most suitable for the following applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;
1. eZRun-35A-SL brushless ESC
2. 10T sensorless brushless motor
3. Program card for car ESC
4. ESC Cooling fan
5. English Manual for ESC and Program Card
ESC Specs: Output: eZRun-35A-SL: Continuous current 35A, burst current 190A.
Input: 4-9cells NiMh/NiCd or 2-3 cells LiPo. Note1
BEC Output: 6V/1.5A.
Resistance: eZRun-35A-SL: 0.0015 Ohm.
Motor Supported: Sensorless Brushless motor.
Suitable Brushless Motor: eZRun-35A-SL: 9T and >9T (Note2).
Suitable Cars: eZRun-35A-SL: 1/10, 1/12 on-road car for sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 30g (Without wires).
Note1:
For 4-6 Cell Ni-Cd/Ni-MH or 2 cell lithium batteries: You need not change the included ESC cooling fan;
For 7-9 Cell Ni-Cd/Ni-MH or 3 cell lithium batteries: You will need to upgrade the ESC cooling fan to match the input voltage as the included fan was not designed to operate under higher voltage than 7.4V or you may choose to power the fan from the receiver.
Note2:
The values of "T" number is tested under the following conditions:
a) The input is a 6 cells Ni-Cd/Ni-MH battery;
b) The ESC is equipped with a cooling fan.
Features:
1. Compatible with all sensorless brushless motor.
2. Use of top quality electronic components to ensure ESC durability.
3. Excellent start-up, acceleration and linearity features.
4. Choice between Racing mode (Forward/Brake) or Forward/Reverse mode.
5. 4 steps of maximum reverse force adjustment.
6. 6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
7. 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
8. 8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
9. 8 steps of timing adjustment to get the best compatibility with various of motors.
10. One button transmitter setup and modes programmed via included Programming Card.
11. Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
12. Dustproof design for the motor
